Features                                            Back to FAQ

To use feature keys and programmable speed-dial keys, first take telephone off-hook by either lifting handset or pressing SPKR.  Then, press the desired feature or speed-dial key.

Note: The FLASH key may used to access certain telephone “system” features.  It has the same effect as “tapping” the hookswitch.  FLASH may be stored in programmable speed-dial memory keys, along with other digits.

In case of trouble with  programmable keys
Programmable speed-dial key memory contents are both protected against accidental loss due to disconnecting the telephone from the telephone line, or by the telephone system itself experiencing a power failure.

On rare occasions, a power surge or extremely high static electricity discharges near the telephone may cause the telephone to "lock-up."  If this happens, some of the telephone’s feature keys may become temporarily inoperative.  To reset, simply disconnect the telephone from the external phone line for approximately 20 seconds by unplugging the modular cord at the rear of the telephone, and then reconnecting the cord.  

SciTec Feature Set

The default settings for the feature codes are as follows: